A. 1

C. 3

D. 5

**B. 2(Correct)**C. 3

D. 5

Answering Exams

A. 1

**B. 2(Correct)**

C. 3

D. 5

C. 3

D. 5

- A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be________________?
- constant, depth of a cantilever of length of uniform strength loaded with Keeg breadth uniformly distributed load varies from zero at the free end and________________?
- If and are external and internal diameters of a circular shaft respectively, its polar moment of inertia, is________________?
- If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured parallel to the supported edge, the effective width of the slab be is_______________?
- The maximum deflection due to a uniformly distributed load w/unit length over entire span of a cantilever of length l and of flexural rigidly EI, is_________________?
- The maximum pull in a cable, carrying a uniformly distributed load and supported at two ends which are at the same level, is at_____________________?
- The ratio of maximum shear stress to average shear stress of a circular beam, is________________?
- The ratio of the length and depth of a simply supported rectangular beam which experiences maximum bending stress equal to tensile stress, due to same load at its mid span, is_______________?
- The ratio of the maximum deflections of a simply supported beam with a central load W and of a cantilever of same length and with a load W at its free end, is________________?
- When a uniformly distributed load, longer than the span of the girder, moves from left to right, then the maximum bending moment at mid section of span occurs when the uniformly distributed load occupies_______________?

Comments