In reinforced concrete footing on soil, the minimum thickness at edge should not be less than______________?
A. 100 mm
B. 150 mm
C. 200 mm
D. 250 mm
MCQs / Q&A
Minimum thickness of load bearing RCC wall should be_____________?
Minimum thickness of load bearing RCC wall should be_____________?
A. 50 mm
B. 100 mm
C. 150 mm
D. 200 mm
A continuous beam is deemed to be a deep beam when the ratio of effective span to overall depth (1/D. is less than__________________?
A continuous beam is deemed to be a deep beam when the ratio of effective span to overall depth (1/D. is less than__________________?
A. 1.5
B. 2.0
C. 2.5
D. 3.0
Minimum pitch of transverse reinforcement in a column is________________?
Minimum pitch of transverse reinforcement in a column is________________?
A. the least lateral dimension of the member
B. sixteen times the smallest diameter of longitudinal reinforcement bar to be tied
C. forty-eight times the diameter of transverse reinforcement
D. lesser of the above three values
According to IS: 456-1978, the maximum reinforcement in a column is_____________?
According to IS: 456-1978, the maximum reinforcement in a column is_____________?
A. 2 %
B. 4%
C. 6 %
D. 8 %
According to IS : 456-1978, the fiexural strength of concrete is________________?
According to IS : 456-1978, the fiexural strength of concrete is________________?
A. directly proportional to compressive strength
B. inversely proportional to compressive strength
C. directly proportional to square root of compressive strength
D. inversely proportional to square root of compressive strength
Lap length in compression shall not be less than______________?
Lap length in compression shall not be less than______________?
A. 15 4>
B. 20
C. 24 (j)
D. 30 (j)
where (j) is diameter of bar
For a longitudinal reinforcing bar in a column, the minimum cover shall neither be less than the diameter of bar nor less than_______________?
For a longitudinal reinforcing bar in a column, the minimum cover shall neither be less than the diameter of bar nor less than_______________?
A. 15 mm
B. 25 mm
C. 30 mm
D. 40 mm
The percentage of reinforcement in case of slabs, when high strength deformed bars are used is not less than________________?
The percentage of reinforcement in case of slabs, when high strength deformed bars are used is not less than________________?
A. 0.15
B. 0.12
C. 0.30
D. 1.00
The ratio of the diameter of reinforcing bars and the slab thickness is_______________?
The ratio of the diameter of reinforcing bars and the slab thickness is_______________?
A. 1/4
B. 1/5
C. 1/6
D. 1/8