Airport Engineering Archives | Page 3 of 5

The main disadvantage of angle nose out parking configuration of aircraft is that the_______________?

August 13, 2021January 19, 2019 by admin

The main disadvantage of angle nose out parking configuration of aircraft is that the_______________?

A. aircraft rear loading door is far away from terminal building.
B. hot blast is directed towards the terminal building
C. overall apron area required is more
D. all the above

In approach areas of runways equipped with instrumental landing facilities any object within 4.5 km distance from runway end shall be considered as an obstruction if its height is more than______________?

August 13, 2021January 19, 2019 by admin

In approach areas of runways equipped with instrumental landing facilities any object within 4.5 km distance from runway end shall be considered as an obstruction if its height is more than______________?

A. 20 m
B. 30 m
C. 45 m
D. 51 m

The slope of the transitional surface for A, B and C type of runway shall be_______________?

August 13, 2021January 19, 2019 by admin

The slope of the transitional surface for A, B and C type of runway shall be_______________?

A. 1:5
B. 1:7
C. 1:10
D. 1:12

As per UK design criteria, if LCN of aircraft is between 1.25 to 1.5 times the LCN of pavement, then the number of movements allowed are__________________?

August 13, 2021January 19, 2019 by admin

As per UK design criteria, if LCN of aircraft is between 1.25 to 1.5 times the LCN of pavement, then the number of movements allowed are__________________?

A. Zero
B. 300
C. 3000
D. Unrestricted

Assertion A: The width of a taxiway is smaller than the runway width. Reason R : The speed of the aircraft on a taxiway is greater than that on runway.?

August 13, 2021January 19, 2019 by admin

Assertion A: The width of a taxiway is smaller than the runway width. Reason R : The speed of the aircraft on a taxiway is greater than that on runway.?

Select your answer based on coding system given below
A. Both A and R are true and R is the correct explanation of A
B. Both A and R are true but R is not the correct explanation of A
C. A is true but R is false
D. A is false but R is true

The centre to centre spacing of heliport lighting along the periphery of landing and take off area should be______________?

August 13, 2021January 19, 2019 by admin

The centre to centre spacing of heliport lighting along the periphery of landing and take off area should be______________?

A. 2.5 m
B. 5.0 m
C. 7.5 m
D. 10.0 m

In Intrumental landing system, the middle markers are located___________________?

August 13, 2021January 19, 2019 by admin

In Intrumental landing system, the middle markers are located___________________?

A. along the extended centre line of runway end
B. about 1 km. ahead of the runway threshold
C. at the runway threshold
D. about 7 km. ahead of the runway threshold

Runway threshold is indicated by a series of parallel lines starting from a distance of_______________?

August 13, 2021January 19, 2019 by admin

Runway threshold is indicated by a series of parallel lines starting from a distance of_______________?

A. 3 m from runway end
B. 6 m from runway end
C. 10 m from runway end
D. 15m from runway end

For determining the basic runway.length, the landing case requires that aircraft should come to a stop within p % of the landing distance. The value of p is________________?

August 13, 2021January 19, 2019 by admin

For determining the basic runway.length, the landing case requires that aircraft should come to a stop within p % of the landing distance. The value of p is________________?

A. 40 %
B. 50%
C. 60%
D. 75%

As per ICAO, for airports serving big aircrafts, the crosswind component should not exceed_________________?

August 13, 2021January 19, 2019 by admin

As per ICAO, for airports serving big aircrafts, the crosswind component should not exceed_________________?

A. 15 kmph
B. 25 kmph
C. 35 kmph
D. 45 kmph