You type debug ip rip on your router console and see that 172.16.10.0 is being advertised to you with a metric of 16. What does this mean?

Byadmin August 25, 2022

Question: You type debug ip rip on your router console and see that 172.16.10.0 is being advertised to you with a metric of 16. What does this mean?
[A].

The route is 16 hops away.

[B].

The route has a delay of 16 microseconds.

[C].

The route is inaccessible.

[D].

The route is queued at 16 messages a second.

Answer: Option C

Explanation:

You cannot have 16 hops on a RIP network by default. If you receive a route advertised with a metric of 16, this means it is inaccessible.

Eigrp And Ospf | Networking

Which of the following network types have a designated router and a backup designated router assigned?

Question: Which of the following network types have a designated router and a backup designated router assigned?

[A].

1, 2 and 3
[B].
1 and 3
[C].
3 and 4
[D].
All of the above

Answer: Option B

Explanation:

No DR is assigned on any type of point-to-point link. No DR/BDR is assigned on the NBMA point-to-multipoint due to the hub/spoke topology. DR and BDR are elected on broadcast and non-broadcast multi-access networks. Frame Relay is a non-Broadcast Multi-Access (NBMA) network by default.

Read More Which of the following network types have a designated router and a backup designated router assigned?
Ios And Security Device Manager | Networking

You type show running-config and get this output:

Question: You type show running-config and get this output:

[A].

If no command has been typed in 35 seconds, the console connection will be closed.
[B].
If no router activity has been detected in 1 hour and 35 minutes, the console will be locked out.
[C].
If no commands have been typed in 1 minute and 35 seconds, the console connection will be closed.
[D].
If you’re connected to the router by a Telnet connection, input must be detected within 1 minute and 35 seconds or the connection will be closed.

Answer: Option C

Explanation:

The exec-timeout command is set in minutes and seconds.

Read More You type show running-config and get this output:
Eigrp And Ospf | Networking

A network administrator needs to configure a router with a distance-vector protocol that allows classless routing. Which of the following satisfies those requirements?

Question: A network administrator needs to configure a router with a distance-vector protocol that allows classless routing. Which of the following satisfies those requirements?
[A].

IGRP
[B].
OSPF
[C].
RIPv1
[D].
EIGRP

Answer: Option D

Explanation:

In this question, we’re calling EIGRP just plain old distance vector. EIGRP is an “advanced” distance-vector routing protocol, sometimes called a hybrid routing protocol because it uses the characteristics of both distance-vector and link-state routing protocols.

Read More A network administrator needs to configure a router with a distance-vector protocol that allows classless routing. Which of the following satisfies those requirements?
Computer Science | Networking

Establishing a virtual connection is functionally equivalent to

Question: Establishing a virtual connection is functionally equivalent to
[A].

Connecting as virtual memory
[B].
Physically connecting a DTE and DCE
[C].
Placing a telephone call prior to a conversation
[D].
Placing a modem prior to a conversation

Answer: Option C

Explanation:

No answer description available for this question.

Read More Establishing a virtual connection is functionally equivalent to
Ip Routing | Networking

A network administrator views the output from the show ip route command. A network that is advertised by both RIP and IGRP appears in the routing table flagged as an IGRP route. Why is the RIP route to this network not used in the routing table?

Question: A network administrator views the output from the show ip route command. A network that is advertised by both RIP and IGRP appears in the routing table flagged as an IGRP route. Why is the RIP route to this network not used in the routing table?
[A].

IGRP has a faster update timer.
[B].
IGRP has a lower administrative distance.
[C].
RIP has a higher metric value for that route.
[D].
The IGRP route has fewer hops.

Answer: Option B

Explanation:

RIP has an administrative distance (AD) of 120, while IGRP has an administrative distance of 100, so the router will discard any route with a higher AD than 100.

Read More A network administrator views the output from the show ip route command. A network that is advertised by both RIP and IGRP appears in the routing table flagged as an IGRP route. Why is the RIP route to this network not used in the routing table?
Computer Science | Networking

Operating system functions may include

Question: Operating system functions may include
[A].

input/output control
[B].
virtual storage
[C].
multiprogramming
[D].
All of the above

Answer: Option D

Explanation:

No answer description available for this question.

Read More Operating system functions may include

Similar Posts