Which method can be used for absolute measurement of resistances _______________?
B. Releigh method
C. Ohm’s law method
D. Wheatstone bridge method
The voltage induced in an inductor is represented as,
		A. product of its inductance and current through it.
B. ratio of its inductance to the current through it.
C. ratio of the current through it to its inductance.
D. product of its inductance and rate of change of current through it.
The instantaneous voltage across the inductor is expressed as the product of inductance and a rate of change of current through it as it doesn’t allow any certain change of current through it. Voltage induced in an inductor is written as
How many coulombs of charge flow through a circuit carrying a current of 10 A in 1 minute?
		A. 10
B. 60
C. 600
D. 1200
1 Ampere current means flowing of 1 Coulomb charge per second. That means 10 A current in 1 minute or 60 seconds implies 10 × 60 = 600 coulombs.
In a circuit a 33 Q resistor carries a current of 2 A. The voltage across the resistor is
		A. 33 V
B. 66 v
C. 80 V
D. 132 V
It becomes more difficult to remove_________________?
		A. any electron from the orbit
B. first electron from the orbit
C. second electron from the orbit
D. third electron from the orbit
Which quantity consists of a unit 1KWh ?
		A. Energy
B. Time
C. Power
D. Charge
1 kWh is the amount of energy used by a 1 kW (1000 watt) resistance for 1 hour. Energy = Power × Time.
A closed switch has a resistance of_____________?
		A. zero
B. about 50 ohms
C. about 500 ohms
D. infinity