The heaviest I-section for same depth is_________________?
The heaviest I-section for same depth is_________________?
A. ISMB
B. ISLB
C. ISHB
D. ISWB
Similar Posts
The moment-curvature relation at a plastic hinge is________________?
The moment-curvature relation at a plastic hinge is________________?A. linear
B. parabolic
C. constant moment for all curvatures
D. constant curvature for all momentsThe basic wind speed is specified at a height ‘h’ above mean ground level in an open terrain. The value of’h’ is__________________?
The basic wind speed is specified at a height ‘h’ above mean ground level in an open terrain. The value of’h’ is__________________?A. 10 m
B. 20 m
C. 25 m
D. 50 mcompression force in two end posts The pin of a rocker bearing in a bridge is designed for_________________?
compression force in two end posts The of a rocker bearing in a bridge is designed for_________________?A. bearing and shear
B. bending and shear
C. bearing and bending
D. bearing, shear and bendingBending compressive and tensile stresses respectively are calculated based on_________________?
Bending compressive and tensile stresses respectively are calculated based on_________________?A. net area and gross area
B. gross area and net area
C. net area in both cases
D. gross area in both casesThe relation between intensity of wind pressure p and velocity of wind V is taken as_______________?
The relation between intensity of wind pressure p and velocity of wind V is taken as_______________?A. pa V
B. paV2
C. p a (1/V)
D. paV”2Angle of inclination of the lacing bar with the longitudinal axis of the column should preferably be between____________________?
Angle of inclination of the lacing bar with the longitudinal axis of the column should preferably be between____________________?A. 10° to 30°
B. 30° to 40°
C. 40° to 70°
D. 90°