Chemical Heat Transfer

For large heat transfer area requirement, shell and tube heat exchanger is preferred, because it________________?

Byadmin March 2, 2019August 24, 2021

For large heat transfer area requirement, shell and tube heat exchanger is preferred, because it________________?

A. Occupies smaller space
B. Is more economical
C. Is easy to operate and maintain
D. All A., B. and C.

Chemical Heat Transfer

The Dittus-Boelter equation for convective heat transfer [(i.e. h = 0.023 (K/D) (Re)0.8 (Pr)0.4] cannot be used for________________?

The Dittus-Boelter equation for convective heat transfer [(i.e. h = 0.023 (K/D) (Re)0.8 (Pr)0.4] cannot be used for________________?

A. Low Reynold’s number
B. Very low Grashoff number
C. Molten metals
D. All A., B. and C.

Read More The Dittus-Boelter equation for convective heat transfer [(i.e. h = 0.023 (K/D) (Re)0.8 (Pr)0.4] cannot be used for________________?
Chemical Heat Transfer

A measure of the extent to which viscous heating is important relative to the heat flow resulting from the impressed temperature difference is represented by the _______________ number?

A measure of the extent to which viscous heating is important relative to the heat flow resulting from the impressed temperature difference is represented by the _______________ number?

A. Condensation
B. Grashoff
C. Stanton
D. Brinkman

Read More A measure of the extent to which viscous heating is important relative to the heat flow resulting from the impressed temperature difference is represented by the _______________ number?
Chemical Heat Transfer

In forced convection, the Nusselt number is a function of ____________________?

In forced convection, the Nusselt number is a function of ____________________?

A. Re and Pr
B. Re and Gr
C. Pr and Gr
D. Re and Sc

Read More In forced convection, the Nusselt number is a function of ____________________?
Chemical Heat Transfer

Heat transfer by natural convection is enhanced in system with__________________?

Heat transfer by natural convection is enhanced in system with__________________?

A. High viscosity
B. High co-efficient of thermal expansion
C. Low temperature gradients
D. Low density change with temperature

Read More Heat transfer by natural convection is enhanced in system with__________________?
Chemical Heat Transfer

1000 Kg of liquid at 30°C in a well stirred vessel has to be heated to 120°C, using immersed coils carrying condensing steam at 150°C. The area of the steam coils is 1.2 m2 and the overall heat transfer co-efficient to the liquid is 1500 W/m2.°C. Assuming negligible heat loss to the surrounding and specific heat capacity of the liquid to be 4 kJ/kg.°C, the time taken for the liquid to reach desired temperature will be__________________?

1000 Kg of liquid at 30°C in a well stirred vessel has to be heated to 120°C, using immersed coils carrying condensing steam at 150°C. The area of the steam coils is 1.2 m2 and the overall heat transfer co-efficient to the liquid is 1500 W/m2.°C. Assuming negligible heat loss to the surrounding and specific heat capacity of the liquid to be 4 kJ/kg.°C, the time taken for the liquid to reach desired temperature will be__________________?

A. 15 min
B. 22 min
C. 44 min
D. 51 min

Read More 1000 Kg of liquid at 30°C in a well stirred vessel has to be heated to 120°C, using immersed coils carrying condensing steam at 150°C. The area of the steam coils is 1.2 m2 and the overall heat transfer co-efficient to the liquid is 1500 W/m2.°C. Assuming negligible heat loss to the surrounding and specific heat capacity of the liquid to be 4 kJ/kg.°C, the time taken for the liquid to reach desired temperature will be__________________?
Chemical Heat Transfer

In a shell and tube heat exchanger, the tube side heat transfer co-efficient just at the entrance of the tube is_________________?

In a shell and tube heat exchanger, the tube side heat transfer co-efficient just at the entrance of the tube is_________________?

A. Infinity
B. Zero
C. Same as average heat transfer co-efficient for tube side
D. None of these

Read More In a shell and tube heat exchanger, the tube side heat transfer co-efficient just at the entrance of the tube is_________________?

Similar Posts