A 6 V battery output is divided down to obtain two output voltages. Three 2.2 kΩ resistors are used to provide the two taps. The two output voltages are___________? A. 2 V, 4 V B. 2 V, 2 V C.…
The internal resistance of a 20,000 ohm/volt voltmeter set on its 5 V range is_____________? A. 20,000 ΩB. 100,000 Ω C. 200,000 Ω D. 1,000,000 Ω
A certain voltage divider consists of three 1 kΩ resistors in series. Which of the following load resistors will have the least effect on the output voltage? A. 1 MΩ B. 100 kΩ C. 1 kΩ D. 330 Ω
Two 1.2 kΩ resistors are in series and this series combination is in parallel with a 3.3 kΩ resistor. The total resistance is____________? A. 138 ΩB. 1,389 Ω C. 5,700 Ω D. 880 Ω
A certain voltage divider consists of two 12 kΩ resistors in series. Which of the following load resistors will have the most effect on the output voltage? A. 1 MΩ B. 24 kΩ C. 18 kΩD. 12 kΩ
The parallel combination of a 470 Ω resistor and a 680 Ω resistor is in series with the parallel combination of four 2 kΩ resistors. The total resistance is___________? A. 1,650 Ω B. 1,078 Ω C. 77.8 ΩD. 778 Ω
The parallel combination of a 470 Ω resistor and a 1.5 kΩ resistor is in series with the parallel combination of five 1 kΩ resistors. The source voltage is 50 V. The percentage of the load current through any single…
On which of the following voltage range settings will a voltmeter present the minimum load on a circuit? A. 1 V B. 50 V C. 500 VD. 1,000 V
The parallel combination of a 6.8 kΩ resistor and a 10 kΩ resistor is in series with the parallel combination of a 2.2 kΩ resistor and a 1 kΩ resistor. A 100 V source is connected across the circuit. The…
The parallel combination of a 470 Ω resistor and a 1.2 kΩ resistor is in series with the parallel combination of three 3 kΩ resistors. A 200 V source is connected across the circuit. The resistor with the most current…