Skip to content
AnsweringExams.Com
  • Home
  • Contact Us / Report Error
  • Disclaimer

Railway Engineering

Two important constituents in the com-position of steel used for rail are_________________?

August 13, 2021January 18, 2019 by admin
Two important constituents in the com-position of steel used for rail are_________________?

A. carbon and silicon
B. manganese and phosphorous
C. carbon and manganese
D. carbon and sulfur

Categories Railway Engineering

The rail is designated by its__________________?

August 13, 2021January 18, 2019 by admin
The rail is designated by its__________________?

A. length
B. weight
C. cross-section
D. weight per unit length

Categories Railway Engineering

The standard length of rail for Broad Gauge and Meter Gauge are respectively __________________?

August 13, 2021January 18, 2019 by admin
The standard length of rail for Broad Gauge and Meter Gauge are respectively __________________?

A. 12 m and 12 m
B. 12 m and 13 m
C. 13 m and 12 m
D. 13 m and 13 m

Categories Railway Engineering

Largest percentage of material in the rail is in its__________________?

August 13, 2021January 18, 2019 by admin
Largest percentage of material in the rail is in its__________________?

A. head
B. web
C. foot
D. head and foot both

Categories Railway Engineering

The cross-sectional area of 52 kg flat footed rail is_________________?

August 13, 2021January 18, 2019 by admin
The cross-sectional area of 52 kg flat footed rail is_________________?

A. 6155 mm2
B. 6615 mm2
C. 7235 mm2
D. 7825 mm2

Categories Railway Engineering

Tensile strength of steel used in rails should not be less than____________________?

August 13, 2021January 18, 2019 by admin
Tensile strength of steel used in rails should not be less than____________________?

A. 450 MPa
B. 500 MPa
C. 700 MPa
D. 850 MPa

Categories Railway Engineering

60 R rails are mostly used in__________________?

August 13, 2021January 18, 2019 by admin
60 R rails are mostly used in__________________?

A. Broad Gauge
B. Metre Gauge
C. Narrow Gauge
D. none of the above

Categories Railway Engineering

The main function of a fish plate is________________?

August 13, 2021January 18, 2019 by admin
The main function of a fish plate is________________?

A. to join the two rails together
B. to join rails with the sleeper
C. to allow rail to expand and contract freely
D. none of the above

Categories Railway Engineering

Fish plate is in contact with rail at________________?

August 13, 2021January 18, 2019 by admin
Fish plate is in contact with rail at________________?

A. web of rail
B. fishing plane
C. head of rail
D. foot of rail

Categories Railway Engineering

Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called_________________?

August 13, 2021January 18, 2019 by admin
Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called_________________?

A. roaring rails
B. hogged rails
C. corrugated rails
D. buckled rails

Categories Railway Engineering
Older posts
Newer posts
← Previous Page1 Page2 Page3 … Page11 Next →
© 2025 AnsweringExams.Com • Built with GeneratePress