Skip to content
AnsweringExams.Com
  • Home
  • Contact Us / Report Error
  • Disclaimer

Fluid Mechanics for Chemical

Boundary layer exists in flow_________________?

August 27, 2021March 9, 2019 by admin
Boundary layer exists in flow_________________?

A. Of real fluids
B. Over flat surfaces only
C. In pipes only
D. Of ideal fluids only

Categories Fluid Mechanics for Chemical

The capillary rise of mercury is maximum in glass tube of dia _____________ mm?

August 27, 2021March 9, 2019 by admin
The capillary rise of mercury is maximum in glass tube of dia _____________ mm?

A. 0.5
B. 1
C. 2
D. 5

Categories Fluid Mechanics for Chemical

Laminar flow is characterised by the nonexistence of_________________?

August 27, 2021March 9, 2019 by admin
Laminar flow is characterised by the nonexistence of_________________?

A. Pressure fluctuation
B. Eddies
C. Deviating velocities
D. All A., B. & C.

Categories Fluid Mechanics for Chemical

The maximum depth from which a centrifugal pump can draw water is________________?

August 27, 2021March 9, 2019 by admin
The maximum depth from which a centrifugal pump can draw water is________________?

A. Dependent on the speed of the pump
B. Dependent on the power of the pump
C. 34 feet
D. 150 feet

Categories Fluid Mechanics for Chemical

The pressure and power requirement of a gas fan at constant speed & capacity varies ____________ the gas density?

August 27, 2021March 9, 2019 by admin
The pressure and power requirement of a gas fan at constant speed & capacity varies ____________ the gas density?

A. Directly as
B. Inversely as square root of
C. Inversely as
D. As square of

Categories Fluid Mechanics for Chemical

A centrifugal pump designed to pump water is employed to pump a more viscous oil. In the later case, the pump_________________?

August 27, 2021March 9, 2019 by admin
A centrifugal pump designed to pump water is employed to pump a more viscous oil. In the later case, the pump_________________?

A. Develops a lower head
B. Capacity is reduced
C. Requires more power
D. All A., B. and C.

Categories Fluid Mechanics for Chemical

A 2″ gate valve fitted in a pipe is replaced by a similar globe valve. Pressure drop in gate valve was Δp. For the same discharge, the pressure drop across globe valve is__________________?

August 27, 2021March 9, 2019 by admin
A 2″ gate valve fitted in a pipe is replaced by a similar globe valve. Pressure drop in gate valve was Δp. For the same discharge, the pressure drop across globe valve is__________________?

A. Δp
B. < Δp
C. > Δp
D. Δp2

Categories Fluid Mechanics for Chemical

The co-efficient of discharge of an orificemeter is a function of ________________?

August 27, 2021March 9, 2019 by admin
The co-efficient of discharge of an orificemeter is a function of ________________?

A. Reynolds number at the orifice
B. Ratio of orifice dia to pipe dia
C. Both A. and B.
D. None of the above parameters, and has a constant value of 0.61

Categories Fluid Mechanics for Chemical

A streamline is a line in flow field _________________?

August 27, 2021March 9, 2019 by admin
A streamline is a line in flow field _________________?

A. That is traced by all the fluid particles passing through a given point
B. Along which a fluid particle travels
C. Such that at every point on it, the velocity is tangential to it
D. None of these

Categories Fluid Mechanics for Chemical

Bernoulli’s equation for steady, frictionless, continuous flow states that the ______________ at all sections is same?

August 27, 2021March 9, 2019 by admin
Bernoulli’s equation for steady, frictionless, continuous flow states that the ______________ at all sections is same?

A. Total pressure
B. Total energy
C. Velocity head
D. None of these

Categories Fluid Mechanics for Chemical
Older posts
Newer posts
← Previous Page1 … Page52 Page53 Page54 … Page72 Next →
© 2026 AnsweringExams.Com • Built with GeneratePress