Skip to content
AnsweringExams.Com
  • Home
  • Contact Us / Report Error
  • Disclaimer

Fluid Mechanics for Chemical

The value of critical Reynolds number for pipe flow is_________________?

August 27, 2021March 9, 2019 by admin
The value of critical Reynolds number for pipe flow is_________________?

A. 1,300
B. 10,000
C. 100,000
D. None of these

Categories Fluid Mechanics for Chemical

The range of a particular Rotameter can be increased by__________________?

August 27, 2021March 9, 2019 by admin
The range of a particular Rotameter can be increased by__________________?

A. Use of floats of different densities
B. No means
C. Increasing the diameter of the float
D. Decreasing the diameter of the float

Categories Fluid Mechanics for Chemical

Propellers are____________________?

August 27, 2021March 9, 2019 by admin
Propellers are____________________?

A. Axial flow mixers
B. Low speed impeller
C. Used for mixing liquids of high viscosity
D. Radial flow mixers

Categories Fluid Mechanics for Chemical

Cavitation occurs in a centrifugal pump when the suction pressure is________________?

August 27, 2021March 9, 2019 by admin
Cavitation occurs in a centrifugal pump when the suction pressure is________________?

A. Less than the vapour pressure of the liquid at that temperature
B. Greater than the vapour pressure of the liquid at that temperature
C. Equal to the vapour pressure
D. Equal to the developed head

Categories Fluid Mechanics for Chemical

Erosion and pits formation on the impeller of a centrifugal pump may be due to________________?

August 27, 2021March 9, 2019 by admin
Erosion and pits formation on the impeller of a centrifugal pump may be due to________________?

A. Cavitation
B. Low speed of impeller
C. Its operation with delivery valve closed for considerable time after starting the pump
D. Off centering of pump with motor

Categories Fluid Mechanics for Chemical

What is the ratio of total kinetic energy of fluid passing per second to the value obtained on the basis of average velocity (for laminar flow through a circular pipe) ?

August 27, 2021March 9, 2019 by admin
What is the ratio of total kinetic energy of fluid passing per second to the value obtained on the basis of average velocity (for laminar flow through a circular pipe) ?

A. 0.5
B. 1
C. 1.5
D. 2

Categories Fluid Mechanics for Chemical

The curve of metacentre for a floating body ____________ the curve of buoyancy?

August 27, 2021March 9, 2019 by admin
The curve of metacentre for a floating body ____________ the curve of buoyancy?

A. Is always below
B. Is the evolute of
C. Intersects at right angle
D. Is tangential to

Categories Fluid Mechanics for Chemical

Slugging occurs in a fluidised bed, if the bed is___________________?

August 27, 2021March 9, 2019 by admin
Slugging occurs in a fluidised bed, if the bed is___________________?

A. Narrow
B. Deep
C. Both A. & B.
D. Neither A. nor B.

Categories Fluid Mechanics for Chemical

Unsteady non-uniform flow is represented by flow through a/an_________________?

August 27, 2021March 9, 2019 by admin
Unsteady non-uniform flow is represented by flow through a/an_________________?

A. Long pipe at constant rate
B. Long pipe at decreasing rate
C. Expanding tube at increasing rate
D. Expanding tube at constant rate

Categories Fluid Mechanics for Chemical

In case of turbulent flow of a Newtonian fluid in a straight pipe, the maximum velocity is equal to (where, Vavg = average fluid velocity)?

August 27, 2021March 9, 2019 by admin
In case of turbulent flow of a Newtonian fluid in a straight pipe, the maximum velocity is equal to (where, Vavg = average fluid velocity)?

A. Vavg
B. 1.2 Vavg
C. 1.5 Vavg
D. 1.8 Vavg

Categories Fluid Mechanics for Chemical
Older posts
Newer posts
← Previous Page1 … Page48 Page49 Page50 … Page72 Next →
© 2026 AnsweringExams.Com • Built with GeneratePress