A. net area and gross area
B. gross area and net area
C. net area in both cases
D. gross area in both cases
A. 95.0 MPa on net area
B. 105.5 MPa on net area
C. 105.5 MPa on gross area
D. 150.0 MPa on gross area
A. 0.55 Awfy
B. 0.65 Awfy
C. 0.75 Awfy
D. 0.85 Awfy
where, Aw = effective cross-sectional area resisting shear fy = yield stress of the steel
A. ± 0.2
B. ±0.5
C. ± 0.7
D. 0
i) the supports
ii) the mid span
iii) the point of application of concentrated loads
The correct answer is?
A. only (i)
B. both (i) and (ii)
C. both (i) and (iii)
D. (i), (ii) and (iii)
A. 0.5 D
B. 0.68 D
C. 0.88 D
D. D
A. is at the maximum distance from CG of the rivet group
B. is at the minimum distance from CG of the rivet group
C. gives the maximum angle between the two forces Fa and Fm
D. gives the minimum angle between the two forces Fa and Fm
where, Fa is the load d by each rivet due to axial load and Fm is the shearing load due to moment in any rivet