Width of ballast section for Broad Gauge is_________________?
Width of ballast section for Broad Gauge is_________________?
A. 1.83 m
B. 2.25 m
C. 3.35 m
D. 4.30 m
Similar Posts
The total gap on both sides between the inside edges of wheel flanges and gauge faces of the rail is kept as_________________?
The total gap on both sides between the inside edges of wheel flanges and gauge faces of the rail is kept as_________________?A. 10mm
B. 13mm
C. 16mm
D. 19 mmWhich of the following mechanical devices is used to ensure that route cannot be changed while the train is on the point even after putting back the signal ?
Which of the following mechanical devices is used to ensure that route cannot be changed while the train is on the point even after putting back the signal ?A. detectors
B. point lock
C. iock bar
D. stretcher barThe purpose of providing fillet in a rail section is to_________________?
The purpose of providing fillet in a rail section is to_________________?A. increase the lateral strength
B. increase the vertical stiffness
C. avoid the stress concentration
D. reduce the wearFor a Broad Gauge route with M+7 sleeper density, number of sleepers per rail length is________________?
For a Broad Gauge route with M+7 sleeper density, number of sleepers per rail length is________________?A. 18
B. 19
C. 20
D. 21The limiting value of cant deficiency for Meter Gauge routes is__________________?
The limiting value of cant deficiency for Meter Gauge routes is__________________?A. 40 mm
B. 50 mm
C. 75 mm
D. 100 mmWhich of the following factors govern the choice of the gauge ?
Which of the following factors govern the choice of the gauge ?i) volume and nature of traffic
ii) speed of train
iii) physical features of the country
The correct answer is ?
A. only (i)
B. both (i) and (ii)
C. both (ii) and (iii)
D. (i), (ii) and (iii)